Overview
These aftermarket bits are made from Grade 5 (6AL4V, knifemaker grade) Titanium and are made to extremely precise tolerances to fit OEM Shirogorov screws. They are designed in such a way that they will not mar the screw heads whatsoever.
All of these bits are now made to fit a standard 1/4" driver, which we also offer for sale. They feature quick connect indentations which allow the bit to be locked in place with a Wera or Wiha locking driver (other drivers are not guaranteed to lock up properly). All of these are also are tapped in the end for a 6-32 screw which make refinishing a breeze and will allow you to install a set screw if you want these to work with a magnetic driver.
The 1/4" Bit-holding screwdrivers we sell are made by Wera and are very high quality. They feature a quick-release chuck allowing the tool bit to lock in place and switched out rapidly
Note that these are individual tool bits, so you will likely need 1 for the pivot and 1 for the body. Also, while these are not designed for Custom Division folders, they may still fit - you will need to take measurements and check below for compatibility.
All tool bits are now made in the USA!
Note: I don't have any pivot tool bits for the old 111 model any longer... for the gen 5 or newer of the 111 model you will need the Reg Pivot Tool Bit
New condition.
